Inquiry
Form loading...

Wholesale Intelligent Digital Electromagnetic Flowmeter for Oil Liquid Water

QFM402  Electromagnetic  flowmeter  is  based  on  Faraday's  law  of  electromagnetic  induction, measuring  the volume flow of conductive  liquid. It  mostly  consists of sensor and transducer, convertting the flow  rate of the measured  liquid  in the  pipe  linearly  into  a  current  signal. In  particular, the  volume flow  of strong corrosive liquids, such as strong acids and alkali, and uniform liquid-solid two-phase suspended liquids such as mud, pulp  and paper pulp can also be measured.

    Features:

      Measurement  is  not  affected  by  the  variation  of  flow  density, viscosity, temperature, pressure and  conductivity

      Implementing 16 bits MCU, providing high integration and accuracy

      Flow  measurement range up to 1500:1

      High definition LCD display with backlight

      RS485 or RS232 interface supports digital communication

      Intelligent empty pipe detection and electrodes resistance measurement diagnosing empty pipe and electrodes contamination   accurately

    Specification:

    Medium Velocity Range

    0.3~12m/s(extend to 0.1-15m/s)

    Norminal Diameter

    DN10-2600

    Norminal Pressure

    4.0MPa(DN10-150);1.6MPa(DN200-600);1.0MPa(DN700-1200);0.6MPa(DN400-2000) Or other specified byorder"

    Accuracy

    0.5%,0.2%

    Fluid Temperature

    -25℃-180℃-250℃

    Conductivity

    >5μ/cm

    Electrode Material

    Stainless Steel/ Tantalum/ Titanium/ Hastelloy Alloy B/ Hastelloy Alloy C/ Platinum Iridium Alloy/ Stainless Steel Coating Tungsten Carbide/ Ni

    Lining Material

    Chloroprene Rubber CR、Fluoroplastic(F4、F46、PFA)、Polyurethane、Alumina Ceramic.

    Body Flange And Shell Material

    Carbon Steel, Stainless Steel, others(Special order)

    Installation Form

    Flange connection,clamp type,thread connection,insertion type

    Protection Level

    IP65、IP68

    Converter Powe Supply

    85-265VA.C、11~40V D.C, Lithium Battery

    Output Signal

    Current/ Puse/ Frequency/ HART Agreement/ RS232/ RS485

    Structure Type

    Split Type, Integral Type, Plugin Type

    Power Waste

    0.65W

    Environmental Temperature

    -25℃-60°℃

    Converter Display Interface

    Chinese and English LCD display interface and operation interface can be switched (other languages ​​can be customized), can display instantaneous flow, cumulative flow, there  are a variety of flow units for selection

    Categories

    Sanitary, diving, high pressure, scraper type, high temperature type, electromagnetic heat meter,etc