Thermal Gas Mass Flow Meter
Features:
1.Measuring the mass flow or volume flow of gas
2.Do not need to do temperature and pressure compensation in principle with accurate measurement and easy operation
Wide range:0.5Nm/s~100Nm/s for gas. The meter also can be used for gas leak detection
3.Good vibration resistance and long service life. No moving, parts and pressure sensor in transducer, no vibration influence on the measurement accuracy
4.Easy installation and maintenance. If the conditions on site are permissible, the meter can achieve a hot-tapped installation and maintenance. (Special order of custom-made)
5.Digital design, high accuracy and stability
6.Configuring with RS485 or HART interface to realize factory automation and integration
Specification:
|
Measuring Medium |
Various gases(Except the acetylene) |
|
Pipe Size |
DN15～DN4000mm |
|
Velocity |
0.1~100 Nm/s |
|
Accuracy |
± 1.5～2.5% |
|
Working Temperature |
40 ° ℃~+200℃ |
|
Working Pressure |
Insertion Sensor:medium pressure≤1.6MPa |
|
Flanged Sensor:medium pressure≤1.6MPa |
|
|
Special pressure please contact us |
|
|
Power Supply |
24VDC or 220VAC |
|
Response Time |
|
|
Output |
4-20mARS485 Pulse,HART |
|
Alarm Output |
1-2 line Relay Normally Open state, 10A/220V/AC or 5A/30V/DC |
|
Sensor Type |
Standard InsertionHot-tapped Insertion and Flanged |
|
Construction |
Compact and Remote |
|
Protection Class |
IP65 |
|
Sensor Housing Mater la |
Stainless steel (316) |